SaveAir® Regulator for Compressed Air Systems
$31.00 – $44.00
The SaveAir regulator is an independent membrane regulator that can be installed in every compressed air system. It supplies a constant, exact outlet pressure regardless of the input pressure. The pressure is factory-set and cannot be changed. SaveAir prevents “dynamic pressure waste.” This arises when the pressure and flow at the withdrawal point are unnecessarily higher than those specified by the manufacturer to achieve the desired function. “Dynamic pressure waste” is extremely costly, a waste of energy that may be found throughout industry.
- Prevents compressed air waste
- Highly reliable
- Tamper proof
- No pressure gauge needed
- Easy to mount in any compressed air system
- Provides consistent pressure reduction
- Saves Energy | Reduces Cost
- Increases tool/system service life
- Prevents Dynamic Pressure Waste
Limit Air Pressure to Tools and Workstations
Many workers believe that cranking up the air pressure at their workstations and to their pneumatic tools will help them work faster and more efficiently. In reality, air pressure that is too high can damage the tools, cause them to malfunction or completely stop working. The increased pressure also increases the potential for injury, as well.
Mounting a SaveAir in the air line to help regulate pressure going to the tools will help prevent potential damage to tools and employees. The SaveAir regulates the pressure going directly to the tool at the desired (and recommended) level. The SaveAir will limit air pressure to tools and is available in a variety of pre-set pressures ranging from 15 psig (1 bar) up to 120 psig (8 bar). These pre-set pressure ranges prevent the operator’s ability to adjust or increase the pressure, ensuring the tool is given the optimal working pressure that it was designed for.
Quantity & Stock
Please contact email@example.com or call 877-406-3215 for lead time information on quantities that exceed current stock levels.
Customers Outside USA
If you are outside the United States, please contact us via email to determine shipping availability.
- Technical Specs
- Downloads & Links
|Max Inlet Pressure||260 PSI (18 Bar)|
|Weight||2.9 oz. (82 g)|
|Dimensions||2.05" x 1.34" x 1.34"|
|Temperature Range||32 to 140°F (0 to 60°C)|
|P1 Inlet Thread||Female/Female|
Spring: Stainless Steel
O-Ring: Nitrile Rubber
SaveAir Part Number
A02: BSP or AS12: NPT
Last 2-3 numbers: Pressure rating
PIR231A0215, PIR231A0235, PIR231A0240, PIR231A0245, PIR231AS12100, PIR231AS12110, PIR231AS12120, PIR231AS12130, PIR231AS12135, PIR231AS1215, PIR231AS1223, PIR231AS1230, PIR231AS1235, PIR231AS1245, PIR231AS1250, PIR231AS1260, PIR231AS1265, PIR231AS1275, PIR231AS1280, PIR231AS1290, PIR231AS1295