DST High Pressure Transducer

DST High Pressure Transducer

The DST high pressure transducer offers a rugged and industrial construction with a 316 stainless steel wetted part sensor that accurately measures numerous gases and liquids.

  • Use as standalone transducer or as 2nd loop feedback in a Proportion-Air 2-loop pressure control assembly
  • Calibrate to any range between full vacuum and 7500 PSI

The DST high pressure transducer accurately measures the pressure of various media with an electrical output signal that is proportional to the full calibrated pressure range. For example, a 0-5000 PSI calibration with a 0-10 VDC output would read 5 VDC at 2500 PSI.

Accuracy ±
Repeatability ±
Weight (oz)
Max P2 (PSI)
  • Technical Specs
  • Downloads & Links
  • Request Quote

Technical Specs

Pressure RangeVacuum thru 7,500 PSI (517 Bar)
Accuracy±0.5% F.S.
Repeatability±0.25% F.S.
MediaNon-Corrosive Gases & Liquids
Port Size1/8″ to 1/4″ NPT (BSPP Availabl
DurabilityImmune to shock & vibration (up to 100 Gs)
Operating Temps32-158°F (0-70°C)
Output SignalsVDC Only


File Request Form: Use this form to request a file other than a standard pressure transducer .STEP file

Submit the form below to download Pressure Transducers .STEP File

Request Quote

DST | High Pressure Transducer

The DST high pressure transducer is made from 316 stainless steel and measures the pressure of gases and liquids from full vacuum to 7,500 PSI with an accuracy ±0.5%. The DST is perfect as a standalone pressure sensor or paired with a Proportion-Air electronic pilot and ratio loaded volume booster. In the 2-loop ratio configuration, the DST helps to accurately control high pressures with only shop air for the dome. All of the DS series transducers can be cleaned for use with oxygen as well.