DSB Industrial Pressure Transducer

DSB Industrial Pressure Transducer

The DSB industrial pressure transducer is the standard in our DS series. The device accurately measures the pressure of non-corrosive gases with an electrical output signal that is proportional to the full calibrated range. For example, a 0-100 PSI calibration with a 0-10 VDC output would read 5 VDC at 50 PSI.

  • Use for 2nd loop feedback in a Proportion-Air 2-loop pressure control assembly or as a standalone transducer
  • Compact and lightweight electronic pressure sensor
  • Calibrate to any range between full vacuum and 175 PSI, as low as 0-2 inches of water column

Originally “DS” meant “down stream” to indicate a pressure transducer that is used to provide electronic feedback from the output pressure of a volume booster back to a QB2 dual-loop proportional control valve. The DSB is most often used this way, but it makes a great standalone transducer as well.

0.2%
Accuracy ±
0.02%
Repeatability ±
4.8
Weight (oz)
175
Max Ps (PSI)
  • Technical Specs
  • Downloads & Links
  • Request Quote

Technical Specs

Pressure RangeVacuum thru 175 PSI (12 Bar)
Accuracy±0.2% F.S.
Repeatability±0.02% F.S.
MediaNon-Corrosive Gases
Port Size1/8″ to 1/4″ NPT (BSPP Available
DurabilityImmune to shock & vibration (up to 100 Gs)
Operating Temps32-158°F (0-70°C)
Output SignalsVDC or Current

Downloads

File Request Form: Use this form to request a file other than a standard pressure transducer .STEP file
Submit the form below to download Pressure Transducers .STEP File

Request Quote

Why Buy Proportion-Air Pressure Transducers?

You can rely onProportion-Air pressure transducers to provide accurate and real-time pressure data, so you can improve process efficiency, product quality, and equipment longevity. As a technology leader in proportional electro-pneumatic pressure and flow control, our team offers you the advantages of:

  • Accuracy
  • Reliability
  • Cost-Effectiveness
  • Integration Support
  • Compliance Assurance

DSB | Industrial Pressure Transducer

The DSB is a compact and lightweight electronic pressure sensor with the ability to measure from full vacuum to 175 PSI. This transducer can be calibrated to any range in between and as low as 0-2 inches of water column for a full scale accuracy of ±0.2%. The DSB can be configured with flying leads to connect to any PLC analog card, or with a 3-pin connector to mate easily with a Proportion-Air electronic pilot (QB2X or QB2S) to improve accuracy, repeatability and eliminate hysteresis when controlling pressure with a 2-loop volume booster assembly.