CartReg ®

The CartReg is a preset miniature safety regulator designed to protect people, tools and equipment. It should be installed in the compressed air supply line or directly into pneumatic blow guns and air wands as a safety and cost efficient means to maintain ideal working pressure and limit the potential for safety mishaps.

Request Quote
CartReg Downloads & Links
Documents Links Downloads
CartReg Datasheet CartReg_Schematic Symbol
Safety Regulator Catalog File Request Form
CartReg Downloads & Links
Documents
CartReg Datasheet
Safety Regulator Catalog
Links
Downloads
CartReg_Schematic Symbol
File Request Form
CartReg Technical Specifications
Max Inlet Pressure Weight Temp. Range P1 Inlet Thread
174 PSI (12 Bar) 0.5oz. (14 g) -4 to 140°F (-20 to 60°C) Male/Male
Materials
Brass, Stainless Steel and NBR
CartReg Technical Specifications
Max Inlet Pressure
174 psig (12 bar)
Weight
0.5oz. (14 g)
Temperature Range
-4 to 140°F (-20 to 60°C)
P1 Inlet Thread
Male/Male
Materials
Brass, Stainless Steel and NBR
CartReg

CartReg


For Blow Guns

CartReg

Example Installation


For Blow Guns

CartReg

Simple Installation


For Blow Guns

Regulate Pressure to Blow Guns

Do your employees and operators of pneumatic blow guns constantly turn up the air pressure on the air wands and blowers beyond the necessary pressure to perform the task at hand? Not only do the higher air pressures violate safety standards, often resulting in cumbersome fines for the company, but they are dangerous and could potentially cause serious bodily harm when a worker’s skin comes into contact with the high pressure. The situation above can be completely avoided by installing a CartReg directly into an blow gun or air wand and regulating (limiting) pressure to the device. CartReg is small and can be installed easily. Remember, the CartReg is PRESET, so it cannot be adjusted, modified or tampered with by employees and operators.

Reduce Noise & Decibel Levels

Many production facilities and job sites utilize pneumatic blow guns and constantly have machinery running. This can create a high decibel environment which is harmful to employees and requires the proper safety precautions to mitigate. A big contributing culprit of additional noise in the workplace is the often unregulated (and probably too high!) pressure that is feeding your pneumatic tools and air guns. A CartReg can be added to your pneumatic blow guns and air wands to reduce the overall decibel level and control the exact amount of pressure feeding your tools, which will extend the life of your pneumatic tools as well. Protect your pneumatic tool investment and help keep your employees safe with CartReg.

CartReg

Thread ConnectionMax Inlet PressureMax Regulated Output PressureMax FlowTolerancesCartReg Part Number
1/4" NPT174 psig30 psig14 scfm± 8.7 psig (Pe 87 psig)PPCR233S1230
1/4" BSP12 bar2 bar396 lpm± 0.6 bar (Pe 6 bar)PPCR233G0220
1/4" NPT174 psig60 psig14 scfm± 11.6 psig (Pe 87 psig)PPCR233S1260
1/4" BSP12 bar4 bar396 lpm± 0.8 bar (Pe 6 bar)PPCR233G0420
1/4" NPT174 psig90 psig14 scfm± 14.5 psig (Pe 145 psig)PPCR233S1290
1/4" BSP12 bar6 bar396 lpm± 1 bar (Pe 10 bar)PPCR233G0620
1/4" F/F, BSPNANANAAdapter KITPPCRA263F0221
CartReg ultima modifica: 2017-08-25T14:31:42-04:00 da admin

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!

Share This