DSB Industrial Pressure Transducer
$330.00
The DSB industrial pressure transducer is the standard in our DS series. The device accurately measures the pressure of non-corrosive gases with an electrical output signal that is proportional to the full calibrated range. For example, a 0-100 PSI calibration with a 0-10 VDC output would read 5 VDC at 50 PSI.
- Use for 2nd loop feedback in a Proportion-Air 2-loop pressure control assembly or as a standalone transducer
- Compact and lightweight electronic pressure sensor
- Calibrate to any range between full vacuum and 175 PSI, as low as 0-2 inches of water column
Originally “DS” meant “down stream” to indicate a pressure transducer that is used to provide electronic feedback from the output pressure of a volume booster back to a QB2 dual-loop proportional control valve. The DSB is most often used this way, but it makes a great standalone transducer as well.
Accuracy ±
Repeatability ±
Weight (oz)
Max Ps (PSI)
- Technical Specs
- Downloads & Links
- Request Quote
Technical Specs
| Pressure Range | Vacuum thru 175 PSI (12 Bar) |
| Accuracy | ±0.2% F.S. |
| Repeatability | ±0.02% F.S. |
| Repeatability | Non-Corrosive Gases |
| Port Size | 1/8″ to 1/4″ NPT (BSPP Available |
| Port Size | Immune to shock & vibration (up to 100 Gs) |
| Operating Temps | 32-158°F (0-70°C) |
| Output Signals | VDC or Current |
Documents
Downloads
File Request Form: Use this form to request a file other than a standard pressure transducer .STEP file
Submit the form below to download Pressure Transducers .STEP File