Burling Valve
a Proportion-Air Brand
General Purpose Pressure Regulators
The general purpose BVR series pressure reducing regulators offer consistent and reliable pressure control. The BVR is adjusted manually by turning a knob and increasing or decreasing spring tension on a diaphragm (or piston) to achieve the desired output pressure. The BVR series is pressure reducing from a maximum inlet pressure of 300 PSI (21 bar) down to various pressure ranges, depending on which model and flow is required. Our general purpose pressure regulators are made from zinc and/or aluminum with a brass valve and nylon valve cap.
The BVR series of general purpose pressure regulators are available in multiple port sizes from 1/2″ up to 1-1/2″ with max potential flow rate of 750 CFM.
- Inline mounting
- Piston-type design (3/4″ to 1-1/2″)
- Diaphragm-type design (1/4″ to 1/2″)
- Self-relieving; non-relieving optional
- Pressure gauge (available)
- Pressure adjustment locking key
- NPTF ported threads
- Pressure reducing regulating valve
BVR02N
0-175 PSI, 75 CFM max
1/4″ NPT
BVR03N
0-175 PSI, 80 CFM max
3/8″ NPT
BVR04N
0-175 PSI, 160 CFM max
1/2″ NPT
BVR06N
0-150 PSI, 350 CFM max
3/4″ NPT
BVR08N
0-150 PSI, 550 CFM max
1″ NPT
BVR10N
0-150 PSI, 700 CFM max
1-1/4″ NPT
BVR12N
0-150 PSI, 750 CFM max
1-1/2″ NPT
SPECIFICATIONS
Ambient/Media Temperature: 40° to 175°F (4° to 79°C)
Body: Zinc (1/4″ to 1/2″), Aluminum (3/4″ to 1-1/2″)
Dome: Aluminum
Fluid Media: Compressed Air
Inlet Pressure: 300 PSIG (21 Bar) maximum
Knob: Acetal
Outlet Pressure: See Table A in data sheet
Pressure Adjustment Locking Key: Removable
Pressure Gauge: 0 to 200 PSIG (14 Bar); 1/4″ NPT gauge ports
Panel Mounting: 2-1/16″ (52mm) hole required
Seals: Nitrile
Valve: Brass (1/4″ to 1/2″), Aluminum (3/4″ to 1-1/2″)
Valve Cap: Nylon
Call
Free Applications Support
P.O. Box 218
McCordsville, IN 46055
Applications & Tech Support