Proportion-Air manufactures the DSW pressure transducer for industrial markets. It is electrically the same as the DSB industrial pressure transducer but housed in a slightly larger canister that is sealed against fluid spray from any direction. This means the DSW offers great accuracy and repeatability for industrial environments.
The DSW pressure transducer accurately measures the pressure of various media with an electrical output signal that is proportional to the full calibrated pressure range. For example, a 0-150 PSI calibration with a 0-10 VDC output would read 5 VDC at 75 PSI.
This pressure transducer can be used as a standalone transducer or as 2nd loop feedback in a Proportion-Air 2-loop pressure control assembly. The DSW pressure transducer can be configured with a variety of connectors or with flying leads for the best fit into your application.
Max P2 (PSI)
DSW Downloads & Links
DSW Technical Specifications
|Vacuum thru 175 PSI (12 Bar)||±0.2% F.S.||±0.02% F.S.||Non-Corrosive Gases|
|Port Size||Durability||Operating Temps||Output Signals|
|1/8″ to 1/4″ NPT||Immune to shock & vibration (up to 100 Gs)||32-158°F (0-70°C)||VDC or Current|
DSW | Pressure Transducer
The DSW transducer pressure transducer is rated NEMA4. This rating means that the DSW is protected against dust and against low pressure jets of water from all directions. The protection rating means the DSW is ideal for outdoor applications or any application that requires frequent washdown. It comes standard with flying leads and your choice of Voltage or Current output for data acquistion.
Most quotes within 6 hours of understanding your needs