Tire Bead Curing

Tire Bead Curing

Tire Bead Curing Procedure

This drawing shows a specific application we did to help a customer with their tire bead curing process. Simple, but stable pressure control was required, so we employed our QPV series for high resolution stability.

The procedure for this process:

  1.  Close ball valve #1
  2. Charge 2700 cubic inch vessel with 33 psi (0.22 MPa) by opening ball valve #2
  3. Close ball valve #2
  4. Command QPV to 3.33 Vdc (30 psi (0.2 MPa) output pressure)
  5. Open ball valve #1 to allow Fairchild booster to vent off pressure
  6. QPV should maintain stable output pressure of 30 psi (0.2 MPa) within 0.5-1 second
  7. Oscope used to verify stability monitoring command, internal monitor and sensor on vessel

The volume is fairly large, so a volume booster was added to increase flow potential. A constant bleed was also added to the volume booster to improve stability during fill.

 

Request Quote

Tire Bead Curing ultima modifica: 2017-12-21T08:04:40-04:00 da Proportion-Air

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!