Superior Vacuum Control for Altitude Simulation
Proportion-Air Case Study
Altitude Simulation | Flight Mask Leak Testing
Product and equipment manufacturers test their products to be sure they meet their customer’s expectations for performance. Those who make products that will be used at different altitudes often test in altitude simulators to ensure performance meets expectations. Whether its an oxygen mask or oxygen regulator for an aircraft or vehicle or aircraft fuel components, altitude simulation is the easiest way to test the equipment in a controlled environment.
In the application shown in the drawing, the customer was testing aircraft mask components and they were looking for a means to make smaller changes in altitude in their simulator and also achieve higher accuracy than they achieved with the device they were using. They tested Proportion-Air’s QPV electronic pressure regulator on their simulator.
With Proportion-Air’s QPV they were able to achieve an amazing accuracy:
±5 feet at 50,000 feet.
When put into a unit of measure with which more of us are familiar, the accuracy they achieved was ±0.0013 PSI of vacuum.
The same technology is available for small chambers or room-sized chambers. Proportion-Air products are built to match the customer’s needs.
Only looking for a replacement product? Please use this form
Most quotes within 6 hours of understanding your needs