Fuselage Fatigue Testing

Fuselage Fatigue Testing

Fuselage Fatigue Testing

A Proportion-Air closed-loop pressure assembly can be used to simulate atmospheric changes in fuselage fatigue testing. Large volumes of air at low pressure need to be added and exhausted quickly and pressure needs to be extremely repeatable for this type of application.

The standard accuracy is ±0.2% and repeatability is ±0.02% of full scale calibration. In this application venting low pressure to atmosphere could be very time consuming, due to the small differential. To speed up exhaust time Proportion-Air modified the proportional regulator so that the customer had access to the exhaust valve drive signal.

Then, the customer added large electrically actuated dump valves and a time delay relay, then the valve drive signal was used to actuate the large dump valves to get back to sea level pressure very quickly. The speed of each fuselage test was improved by 45% when exhaust flow was increased.

Request Quote

Fuselage Fatigue Testing ultima modifica: 2017-09-21T14:04:09-04:00 da Proportion-Air

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!