Cooling a Mold with Water

Cooling a Mold with Water

Cooling a Mold with Water

In a water cooled mold, the FCV allows for tight control of temperature by proportionally controlling the flow of cooling water with a command signal from a PLC. By controlling upstream water from the chiller you can precisely control flow for a consistent, high quality molded part. The FCV is an electronically controlled angle-seat valve that is proportional to the signal commanded and perfect for cooling a mold with water.

A water cooling mold requires consistency from part to part. The FCV is provides excellent repeatability throughout your process. The FCV is a 1″ NPT electronically controlled needle valve made of 316 stainless steel. A 0-10 VDC or 4-20 mA command signal will proportionally control the position of the needle, which in turn controls the size of the opening.

With a max Cv of 19 and the ability to handle pressures up to 250 PSI, the FCV is the process control valve you never new existed, but always needed.

 

Request Quote

Cooling a Mold with Water ultima modifica: 2018-01-19T09:05:53-04:00 da Proportion-Air

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!